2017 Yamaha YP30T (3") Trash Pump


Stock Image

Stock Image

In Stock
Alberta Small Engine Services
YP30T (3") Trash Pump



The Yamaha YP30T 3" trash pump has been engineered to handle dewatering applications with high solid content up to 27mm or 1.06 inches in diameter. Tough hi- chrome impeller and graphite cast iron volute casing with silicon carbide mechanical seals provide excellent long term durability and reliability.

Power: Powered by our proven Yamaha MZ300 4-stroke engine, the YP30T offers outstanding reliability thanks to an electronic ignition, low oil warning - shutdown system and a cast iron cylinder liner.

  • Reliable and fuel efficient, Yamaha MZ300 (296cc), air-cooled, OHV, 2-valve, 4-stroke engine
  • Auto decompression system reduces engine compression to provide a light recoil starter pull for effortless manual starting.
  • Maintenance-free transistorized controlled electronic ignition (TCI) provides a hot spark for fast, easy starting.
  • Cast iron cylinder liner provides excellent heat dissipation for consistent performance and long engine life.
  • Yamaha's Oil Watch Warning System automatically shuts off the engine when oil level is low and will not re-start until oil is added, preventing costly engine damage and enhancing long-term durability.
  • Easy access oil drain plug and easy access washable foam air filter element
  • Large muffler for quiet operation
  • On - off fuel petcock for easy transporting and storage.
  • 5.8 litre fuel tank with a 2.5 hour run time
  • 80 mm / 3" self-priming, centrifugal type pump can handle debris up to 27 mm (1.06") in diameter
  • Maximum capacity is 1,350 litres per minute (297 Imp. gal / min)
  • Total head lift is 24 m (79 ft.), suction head lift is 8 m (26 ft.)
  • Pump body is made of lightweight aluminum
  • Hi-chrome impeller and graphite iron volute casing offer excellent wear resistance and durability. Both are designed to withstand wear from grit, sand, silt, etc. Impeller can be easily removed without special tools.
  • Longer lasting, silicon carbide mechanical seals are both durable and easy to replace.
  • Quick remove pump case cover.
  • 3" standard National Pipe Thread (NPT) fittings for fast, easy connection of suction and discharge hoses (suction and discharge hoses available separately from Yamaha Motor Canada Ltd.).
  • Sturdy perimeter tubular steel frame encases all components for extra protection.
  • Standard 3-year warranty for both private or commercial use, on all Yamaha water and trash pumps
  • Type: Self-priming, centrifugal, trash pump
  • Intake & Discharge Port Size: 80mm (3")
  • Maximum Capacity: 1,350 litres/min (297 Imp. gal/min)
  • Total Head Lift: 24 m (79 ft)
  • Suction Head Lift: 8m (26ft)
  • Maximum Debris Size (Diameter): 27 mm (1.06")
  • Model: MZ300
  • Type: 4-Stroke, OHV, 2-valve, forced air-cooled, single
  • Displacement: 296cc
  • Starting System: Recoil
  • Ignition: Electronic TCI
  • Fuel Tank Capacity (L): 5.8 litres (87 octane - regular fuel)
  • Run time: 2.5 hrs
  • Dry Weight: 62.5 kg (138 lb)
  • L x W x H mm (in): 685 x 505 x 555 mm (27 x 20 x 21.9'')
  • Private Use: 3-year limited
  • Commercial Use: 3-year limited
Every attempt has been made to showcase Canadian versions of our products, but all images, information and specifications may not be exact and are subject to change without notice. Some models may be shown with optional accessories.



Engine Type
4-Stroke, OHV, 2-valve, forced air-cooled, single
Engine Displacement


Pump Style
Self-priming, centrifugal, trash pump
Discharge Capacity
1,350 L/min (297 Imp. gal./min)
Discharge Port Diameter
80mm (3 in.)
Suction Diameter
80mm (3 in.)
Head Lift
24 m (79 ft.)
Suction Head Lift
8 m (26 ft.)
685 x 505 x 555 mm (27 x 20 x 21.9 in.)
62.5 kg (138 lb.)